Author Topic: it came in!  (Read 2846 times)

0 Members and 1 Guest are viewing this topic.

Offline A.l.b.

  • Forum Veteran
  • ***
  • Posts: 451
it came in!
« on: November 13, 2014, 08:46:53 PM »
ok the axial has came in at last. i am going to need some parts. does anyone know where to buy/get the following…

3 plate thrust bearing      tyre holder for right side… a crc one will work. 2 X-ray gear rings or 1 X-ray and 1 crc ring.   (spur gear and pinion gear know blake has in his shop.) 



if you know where to get or you have the above let me know. otherwise i have everything else thx guys!
Emaxx + parked car  don't mix..................

Offline Blake

  • Administrator
  • Forum Veteran
  • *****
  • Posts: 3164
Re: it came in!
« Reply #1 on: November 14, 2014, 12:53:14 AM »
I have some thrust bearing kits in stock - not sure if they will fit that car though.  Best to bring it in and we'll see what CRC stuff will work.

Blake

Offline A.l.b.

  • Forum Veteran
  • ***
  • Posts: 451
Re: it came in!
« Reply #2 on: November 14, 2014, 01:46:24 AM »
ok i will do that.
Emaxx + parked car  don't mix..................

Offline BCbud

  • Forum Veteran
  • ***
  • Posts: 1195
Re: it came in!
« Reply #3 on: November 14, 2014, 10:13:12 AM »
Didn't the thrust bearing I gave you in the summer from my T1FK04 diff not work?

Neil.
Xray T4 2013 Touring Stock - Xray T4 2013 VTA - Xray NT1 - CRC Gen-X10  - CRC GEN-X - CRC GEN-XI - Traxxas Slash 4X4 with LCG conversion - RC8Be  - Xray XB4  - DX3R-PRO
Recycled teenager.
XLR8!

Offline valk

  • Forum Veteran
  • ***
  • Posts: 1277
  • N00B
Re: it came in!
« Reply #4 on: November 14, 2014, 11:20:34 AM »
If it doesn't end up working out, dan has a killer deal for his pancars atm

Offline A.l.b.

  • Forum Veteran
  • ***
  • Posts: 451
Re: it came in!
« Reply #5 on: November 14, 2014, 09:30:12 PM »
The thrust Bering that you gave to me Neil was the right size but when I put silicone grease on it and came back to it 2 weeks later they turned white and brittle. I have no idea in the world why.
Emaxx + parked car  don't mix..................

Offline A.l.b.

  • Forum Veteran
  • ***
  • Posts: 451
Re: it came in!
« Reply #6 on: November 15, 2014, 02:35:34 PM »
Ok I got everything hooked up and installed the mottor so now it is almost ready to go!
Emaxx + parked car  don't mix..................

Offline BCbud

  • Forum Veteran
  • ***
  • Posts: 1195
Re: it came in!
« Reply #7 on: November 15, 2014, 03:48:28 PM »
I have another thrust bearing for you. Do you still have the 2 washers?

Neil.
« Last Edit: November 15, 2014, 04:09:17 PM by BCbud »
Xray T4 2013 Touring Stock - Xray T4 2013 VTA - Xray NT1 - CRC Gen-X10  - CRC GEN-X - CRC GEN-XI - Traxxas Slash 4X4 with LCG conversion - RC8Be  - Xray XB4  - DX3R-PRO
Recycled teenager.
XLR8!

Offline A.l.b.

  • Forum Veteran
  • ***
  • Posts: 451
Re: it came in!
« Reply #8 on: November 15, 2014, 05:10:15 PM »
the cuped washers? yes i have 1 or 2
Emaxx + parked car  don't mix..................

Offline valk

  • Forum Veteran
  • ***
  • Posts: 1277
  • N00B
Re: it came in!
« Reply #9 on: November 15, 2014, 05:26:45 PM »
You can use flat wahers as long as bearing race in good condition. We do this with slapmaster to reduce friction.

Offline A.l.b.

  • Forum Veteran
  • ***
  • Posts: 451
Re: it came in!
« Reply #10 on: November 15, 2014, 06:06:29 PM »
ok i will bring all the pan car stuff to the race in 1 hour
Emaxx + parked car  don't mix..................

Offline A.l.b.

  • Forum Veteran
  • ***
  • Posts: 451
Re: it came in!
« Reply #11 on: November 16, 2014, 02:41:04 AM »
thx guys! now that i have all the parts i should be racing 1/12 scale by next week!
Emaxx + parked car  don't mix..................