The ones I ordered haven't arrived and Shaver doesn't have any right now. I've got the unflanged ones to work with a spacer in between them, but the only thing holding the wheel on is friction. I don't know if it would hold for a complete race.
Thanks.
Ross
No it won't hold. Some people have tried. Somebody should be able to help out though. Craig probably has some.
i got a pair you can borrow for the night..
Thanks.
Ross,
I have a pair of brand new Jaco purple fronts on un-flanged wheels I can bring tonight if you need them.
Theses have a spacer/bearing stop built into the centre of the wheels.
Regards,
Nick
Quote from: WhoDoYouThink on October 24, 2009, 12:18:30 PM
Ross,
I have a pair of brand new Jaco purple fronts on un-flanged wheels I can bring tonight if you need them.
Theses have a spacer/bearing stop built into the centre of the wheels.
Regards,
Nick
Are those the large diameter old-style ones? If so I have some too. I can't get them to fit under the body (at a reasonable ride height).
I should be able to use Jarrod's or failing that, I have some washers of just the right size to go between the wheel nut and wheel, as a last resort. The 1/8" ID bearings are getting a little hard to find as the newer cars went to 3/16" axles if I remember correctly. I have a 3.2r.
Yes, they have a fairly large diameter, but Im sure a tire truer or two should be there tonight.
Quote from: Melbatoast on October 24, 2009, 01:01:54 PM
Quote from: WhoDoYouThink on October 24, 2009, 12:18:30 PM
Ross,
I have a pair of brand new Jaco purple fronts on un-flanged wheels I can bring tonight if you need them.
Theses have a spacer/bearing stop built into the centre of the wheels.
Regards,
Nick
Are those the large diameter old-style ones? If so I have some too. I can't get them to fit under the body (at a reasonable ride height).
I should be able to use Jarrod's or failing that, I have some washers of just the right size to go between the wheel nut and wheel, as a last resort. The 1/8" ID bearings are getting a little hard to find as the newer cars went to 3/16" axles if I remember correctly. I have a 3.2r.
what front end are you using?? the new gen x one??
Quote from: jarrodH on October 24, 2009, 01:54:04 PM
Quote from: Melbatoast on October 24, 2009, 01:01:54 PM
Quote from: WhoDoYouThink on October 24, 2009, 12:18:30 PM
Ross,
I have a pair of brand new Jaco purple fronts on un-flanged wheels I can bring tonight if you need them.
Theses have a spacer/bearing stop built into the centre of the wheels.
Regards,
Nick
Are those the large diameter old-style ones? If so I have some too. I can't get them to fit under the body (at a reasonable ride height).
I should be able to use Jarrod's or failing that, I have some washers of just the right size to go between the wheel nut and wheel, as a last resort. The 1/8" ID bearings are getting a little hard to find as the newer cars went to 3/16" axles if I remember correctly. I have a 3.2r.
what front end are you using?? the new gen x one??
Nope, old Associated one. I might bring the one from my GenX-10, but I'm not sure it's a direct swap.
If you have the 3/16" bearing no worries, looks like my washer setup is going to work fine for today. The wheelnut (put on backwards) wedges into the washer opening, basically making a flange. Got a plastic spacer between the bearings so they're spaced correctly. There's a little more friction than the proper setup but just barely.
ah ya i got the gen x ones.. but i have a complete front end if you want to try it.. ill have it with me..
ya you are alot of help Jarrod.lol How many guys did i see rolling there eye's with your car setup. ::) lol Can we leave the help to the new guys that need it.... I must say your car looked fast during tare down. ;D
Quote from: gotnitro on October 26, 2009, 12:44:50 AM
ya you are alot of help Jarrod.lol How many guys did i see rolling there eye's with your car setup. ::) lol Can we leave the help to the new guys that need it.... I must say your car looked fast during tare down. ;D
..ya to bad it wasnt workin when it counted.. it did feel good for the 2 minutes i got to drive it.. :P
ill try not to pass you to many times next week..