Good day!
Now all the t-bar cars that are on the shelf can be put back into action!
https://www.ssl-stormerhobbies.com/cgi-bin/seekpart.pl?pn=SZ5200PROSD1S
Neil.
I don't like the way it's wired. One cell will always be exercised more than the other that way.
would it be better to take the plug and T it off the bridged wires?
Actually this was the only way they could get it approved by Roar. As they need a way to make sure it stay at a single cell. any other way could be tampered with.
it weird i know
The battery would be better balanced if the + wire came off one cell, and the - wire off the other cell.
This way, a poor connection between the two batteries won't be easily detected, and will work the cell with the connector more than the other cell.
Tom
I totally agree with what your saying.
i was watching the thread on RCtech and they had tons of different configuration but this was the only one that roar allowed i guess.
for all the guys who will be using the 4mm plugs you might want to mod your plugs like mine
(http://www.digital-works.org/IROCC/temp/IMG_2089.JPG)
if you leave them like this photo even with 16ga wire the body will hit the wires
(http://www.digital-works.org/IROCC/temp/IMG_2091.JPG)