200MM Pan Car Bodies

Shawn68z · February 12, 2008, 09:22:12 AM

Is this the only GTP body for a 200mm pan car?

http://www.pro-lineracing.com/protoform/index.html

Shawn.

Gorden · February 12, 2008, 10:03:51 AM

try this http://www.stormerhobbies.com/cgi-bin/searchpn.pl?dterm=gtp&dterm3=&pn=&mterm=&oterm=&uterm=&sthumb=on&smode=0

T-bang has this one https://www.ssl-stormerhobbies.com/cgi-bin/seekpart.pl?src=ns&pn=PFM140722

I think

Gorden

Arch · February 12, 2008, 10:30:19 AM

My pan car that I pulled out of my museum is a super speedway chassis. Its 7 3/4 inchs wide ,width of rear axle with tires on is 7 15/16th.Witch size of gtp body would fit this best? :?

Arch · February 12, 2008, 10:30:47 AM

My pan car that I pulled out of my museum is a super speedway chassis. Its 7 3/4 inchs wide ,width of rear axle with tires on is 7 15/16th.Witch size of gtp body would fit this best? :?

RC51 · February 12, 2008, 10:49:57 AM

Hi, Guys.

I've been posting in several places that I have been in contact with PROTOform about this. Dale is considering a post-production run of the Porsche 911 GTP 200mm body. However, the industry trend appears to be away from GTP and into front-engine style bodies. Industry needs to shake itself out and when they do, there will be more bodies produced. At this point, however, everyone's trying to figure it out.

P.

haddow · February 12, 2008, 12:18:16 PM

Quote from: "Arch"My pan car that I pulled out of my museum is a super speedway chassis. Its 7 3/4 inchs wide ,width of rear axle with tires on is 7 15/16th.Witch size of gtp body would fit this best? :?

get one of the bodies phil has available. Or the first couple on that stormer hobbies link above would fit.

Jody

BigDawg · February 12, 2008, 01:44:03 PM

Quote from: "Arch"My pan car that I pulled out of my museum is a super speedway chassis. Its 7 3/4 inchs wide ,width of rear axle with tires on is 7 15/16th.Witch size of gtp body would fit this best? :?

i thought they were measured in mm???

Tom · February 12, 2008, 02:06:13 PM

Quote from: "BigDawg"i thought they were measured in mm???

That started with touring cars. Pan cars have been around way longer.

Blake · February 12, 2008, 03:47:47 PM

Quote from: "Arch"My pan car that I pulled out of my museum is a super speedway chassis. Its 7 3/4 inchs wide ,width of rear axle with tires on is 7 15/16th.Witch size of gtp body would fit this best? :?

7 15/16" is pretty close to 200mm, so that's what you want, rather than the 235mm bodies. I too am looking for a 200mm GTP body as my pan car is also Super Speedway like Shane's.

Blake

BigDawg · February 12, 2008, 03:56:13 PM

Quote from: "Tom"
Quote from: "BigDawg"i thought they were measured in mm???

That started with touring cars. Pan cars have been around way longer.

opps i guess that should have been i think they are measured in mm, i guess the days of asking for a 7 15/16 body was before my time!

Tom · February 12, 2008, 04:01:04 PM

Before touring cars, it was easy.

Pan cars were all wide, then the super speedway cars came out, so there was then wide and narrow.

Now, with touring cars, you have to specify a width -- that's much more complicated!