blue thunder

Started by gotnitro, May 17, 2010, 11:44:53 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 2 3 4 All
User actions

gotnitro

#30
May 25, 2010, 04:02:19 PM
353 .12 C as in ceramic balls dog balls and it was 389.00 canadian to my door hope it shows up soon

Shawn68z

#31
May 25, 2010, 08:30:14 PM

Sounds like he got it from RC -Toro. So thats the 353 2010 with Ceramic bearings.


Shawn,

gotnitro

#32
May 26, 2010, 03:32:38 PM
so i went into the shaver shop and picked up there last bottle of 30%and opened it in front of jeff and said look its green. So we opened a gal of 20% and what a difference so i am again running 20% and jeff took the 30% of the shelf.

Gorden

#33
May 26, 2010, 07:37:01 PM
Quote from: gotnitro on May 26, 2010, 03:32:38 PM
Jeff took the 30% of the shelf.

Should they not be looking into helping out with the new motor as it was the  fuel that killed your motor

Gorden

Shawn68z

#34
May 26, 2010, 07:43:02 PM
Quote from: light on May 26, 2010, 07:37:01 PM
Quote from: gotnitro on May 26, 2010, 03:32:38 PM
Jeff took the 30% of the shelf.

Should they not be looking into helping out with the new motor as it was the  fuel that killed your motor

Gorden

Hate to say it but:  " Prove it was the fuel "


Shawn

gotnitro

#35
May 26, 2010, 10:05:33 PM
ya i dont think i could convince them or did i have time to :'(

jarrodH

#36
May 27, 2010, 12:07:11 AM
you would be hard pressed to prove it was the fuel that caused the meltdown.. i ran a bottle of my dads old plane fuel from the late 80's early 90's in my 1/8 truck.. obviously didnt have any nitro left as it would have all since evaporated.. and thus didnt have the brute power as the new stuff i baught after did, but it still ran pretty decent, and stayed cool.. probably would have been perfect break in fuel..lol
ridez
2x 1/12 CRC xti-
1/12 nitro hydroplanes
1/10 customworks direct drive sprint. 
1/10 kyosho optima mid se
1/10 losi 22-2 buggy
1/10 xray t2'16
1/10 bolink eliminator

Falcon

#37
May 27, 2010, 01:36:43 AM
gerry

talk to jeff and just see what he can do for you. It had to be the fuel.
John Bowker
Victoria,BC

BigDawg

#38
May 27, 2010, 01:56:28 PM
Hate to say it but I agree with j rod it ain't the fuel if fuel went bad all that would happen is the nitro content decreases wich would mean more oil wich is even more lube for the bearings. I think you just bought a crap motor
AKA MrDoug

gotnitro

#39
May 29, 2010, 01:31:13 AM
new motor is in the car. Looks like sunday is a break in day. 20% did any one change the head gaskets at all or only needed for the 30%

Gorden

#40
May 29, 2010, 09:20:33 AM
Quote from: gotnitro on May 29, 2010, 01:31:13 AM
new motor is in the car. Looks like sunday is a break in day. 20% did any one change the head gaskets at all or only needed for the 30%

I left mine alone

gotnitro

#41
May 29, 2010, 07:18:57 PM
k 1 tank done the rest will be at the track. Can someone bring a heat gun

Gorden

#42
May 29, 2010, 08:32:46 PM
Quote from: gotnitro on May 29, 2010, 07:18:57 PM
k 1 tank done the rest will be at the track. Can someone bring a heat gun

I have the gun packed for you

Gorden

gotnitro

#43
May 29, 2010, 10:04:22 PM
kool thanks

gotnitro

#44
August 30, 2010, 07:47:50 PM
shaver only has 20% sport blue thunder does any one have a gallon they want to sell
Print
Go Up Pages 1 2 3 4 All
User actions