Indoor tire and ride height.

Started by Jtg.73, October 06, 2012, 03:24:12 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Jtg.73

October 06, 2012, 03:24:12 PM
Going to try to have a WGT car this winter.  What do I need to cut my tires down to, and whats a good roll out to start with? 

Blake

#1
October 06, 2012, 03:45:57 PM
Hey John,

I thought you were out of town this winter for work?

Try starting your tires at 55-56mm (front and rear).  If you're rolling over, then you might need to go smaller.  Rollout should be between 60-70mm I believe.

Blake

valk

#2
October 06, 2012, 04:02:54 PM
wcics rideheight is 4mm minimum. so i wouldnt go lower than that for club racing.

BCbud

#3
October 06, 2012, 04:17:54 PM
Quote from: valk on October 06, 2012, 04:02:54 PM
wcics rideheight is 4mm minimum. so i wouldnt go lower than that for club racing.

That is the club minimum as well. The minimum of 3, 4 & 5mm for 1/12th, WGT and touring is to protect the carpet and even in club races is not to be exceeded.

Neil.
Xray T4 2013 Touring Stock - Xray T4 2013 VTA - Xray NT1 - CRC Gen-X10  - CRC GEN-X - CRC GEN-XI - Traxxas Slash 4X4 with LCG conversion - RC8Be  - Xray XB4  - DX3R-PRO
Recycled teenager.
XLR8!

Jtg.73

#4
October 06, 2012, 04:51:47 PM
Quote from: Blake on October 06, 2012, 03:45:57 PM
Hey John,

I thought you were out of town this winter for work?

Try starting your tires at 55-56mm (front and rear).  If you're rolling over, then you might need to go smaller.  Rollout should be between 60-70mm I believe.

Blake

Chances are, I will be out of town for work (I hope).  I would like to make it out to a few races if possible. Speed Weekend in particular.
Print
Go Up Pages1
User actions