Winter 2014/2015 Facility

[gotnitro]

I will be there close to 6

[Blake]

Thanks again for all the help tonight fellas.  I'll be there again tomorrow night from 5:30PM - 8:00PM.  No pressure to be there, but I know that at least myself and Craig will be there.  I think Gerry is coming to put a second coat of paint in the store, and Craig is going to finish the floor sanding.  Then we'll do a massive sweep/blow to get everything clean.

Also, I'm hoping to get Brian there with a hammer drill so we can secure the re-routed wiring.

At that point, the focus will be to figure out the driver's stand, and then think about laying carpet.

Blake

If brian cant make it, I can bring by drill.    Just have to figure out what I am doing with my truck first.. Had a little accident and need to get it fixed.... (sent some debris thru the rear window... )


Shawn.

Hey Shawn,

Cool, thanks.  Do you have a hammer drill?  And bits?

Blake

[Shawn68z]

Thanks again for all the help tonight fellas.  I'll be there again tomorrow night from 5:30PM - 8:00PM.  No pressure to be there, but I know that at least myself and Craig will be there.  I think Gerry is coming to put a second coat of paint in the store, and Craig is going to finish the floor sanding.  Then we'll do a massive sweep/blow to get everything clean.

Also, I'm hoping to get Brian there with a hammer drill so we can secure the re-routed wiring.

At that point, the focus will be to figure out the driver's stand, and then think about laying carpet.

Blake

If brian cant make it, I can bring by drill.    Just have to figure out what I am doing with my truck first.. Had a little accident and need to get it fixed.... (sent some debris thru the rear window... )


Shawn.

Hey Shawn,

Cool, thanks.  Do you have a hammer drill?  And bits?

Blake

Yes. Its a rotary hammer drill for drilling thru solid rock. 


Shawn.

[Blake]

Cool - sounds good!

Blake

[Blake]

Thanks for another good work night.  Rob and Jarrod had the nastiest job, getting the toilet secured properly.  Pretty disgusting, but much more solid now.  Craig finished the floor, and Shawn/Rob finished the electrical.  Gerry finished painting the store.

I won't be around, but I believe a dump run, and final clean/blow will be happening on Saturday.  Craig has the keys and will coordinate that.  Also, if time allows, the driver's stand modifications may happen.  In theory we could probably lay carpet early next week, but we'll have to see how the landlord's heater installation project is going.

Thanks again everyone for all the help - very much appreciated!


Blake

[dajracer]

Don't forget the plywood for the driver's stand is in my carport. The 4 sheets in my carport aŕe the 4' wide stuff,  the stuff in the van is the narrower stuff that would cover the scaffold planks when they are tight together.

[freddie]

lets meet between 9-9:30 sat morning if you have mop and bucket please bring the floor could use a good mopping there is a load to go to the dump bathroom cleaning rags and cleaner will make it smell freshhhhhhhhhhhhhhh

[A.l.b.]

if the bathroom smells bad baking soda and air freshener will do the job

[freddie]

no raceing but we will be cleaning new Facility 9am bring your cleaning supplies and lets get it done

please post if you will be coming 

[BCbud]

So we are not racing tomorrow? We are scheduled to race, was this decided last weekend as this is the first I heard of it.

Neil.

[Falcon]

I'll be there

[BCbud]

I will not be there, if the truck is not there then there is no point.

Neil.

[freddie]

what truck are you looking for

[Shawn68z]

Rob, I will be at the new place.  What type of supplies to you want us to bring? Mainly mops?

Also how did Craig make out with the driver stand?  I can help with that too.

Shawn.

[freddie]

mops will be good I picked up squeegee and loaded the drivers stand